The Battle Bricks Deathbringer Guide: Stats, Strategy & More
Master the final boss of Tumore Mode with our complete The Battle Bricks Deathbringer guide. Learn stats, phase strategies, and best battlers to use.
Introduction
If you've made it to the end of Chapter 1 in Tumore Mode, you've already faced some tough challenges. But nothing prepares you for The Battle Bricks Deathbringer. This Traitless boss is a massive difficulty spike that will test everything you've learned. Unlike his predecessor Doombringer, Deathbringer trades armor for blistering speed and devastating area-of-effect attacks. He's designed to punish slow reactions and poor unit management. In this guide, we'll break down his stats, explain each of his three deadly phases, and provide a proven strategy to help you claim victory.
Who Is the Deathbringer?
The Deathbringer is the final boss of Chapter 1 Tumore Mode, debuting in the Doomspire Brickbattle stage. He is a giant Robloxian with a red horned skull, bloodied bandages, and dark red chains wrapped around his torso. According to the game's lore, he is completely enraged after his face burned off, seeking revenge on those who defeated him. He'll do anything to strike his foes, even if it means cheating or sacrificing his own allies.
Key Differences from Doombringer
While Doombringer relies on armor and steady damage, The Battle Bricks Deathbringer is all about overwhelming speed and DPS. Here's a quick comparison:
| Attribute | Doombringer | Deathbringer |
|---|---|---|
| Armor | High | 0 |
| Attack Rate | Slow | Very Fast |
| Movement Speed | Slow | 1.5 (up to 8 in Phase 3) |
| Special Ability | None | Blood Sacrifice, Death Slam, Raging Spin |
| Ally Interaction | None | Kills allies for damage boost |
This trade-off makes Deathbringer far more aggressive and unpredictable. He doesn't give you time to breathe.
Deathbringer Stats and Abilities
Understanding the raw numbers behind The Battle Bricks Deathbringer is crucial for planning your lineup. Below are his base stats, which do not include stage magnifications.
| Stat | Value |
|---|---|
| Health | 4,000 |
| Damage (Base) | 50 |
| Damage (Blood Sacrifice) | 50–150 |
| Damage (Raging Spin) | 12.5–37.5 |
| Attack Rate | 2 (Phase 1), 1 (Phase 2), 0.25 (Phase 3) |
| Range | 6 |
| AoE Radius | 4 |
| Walkspeed | 1.5 (8 in Phase 3) |
| Armor | 0 |
| Resistance | 0 |
| Trait | Traitless |
| Special Ability | Base Destroyer (3x damage to bases) |
Phase Breakdown
Deathbringer has three distinct phases, each triggered by his health percentage.
| Phase | Trigger | Changes |
|---|---|---|
| Phase 1 | 100%–51% HP | Fast attacks, high DPS, no special abilities |
| Phase 2 | 50% HP (Blood Sacrifice) | Kills all allies, gains damage boost, unlocks Death Slam |
| Phase 3 | 20% HP (Raging Spin) | Knocks himself back, becomes untargetable briefly, then spins rapidly with reduced damage but extreme attack speed |
Blood Sacrifice is his most dangerous ability. When triggered, he deals infinite damage to all enemies on the field, gaining a 25% damage boost per ally killed (up to 200% from 8 sacrifices). This also gives you money for each enemy he kills, but the trade-off is brutal.
Death Slam occurs after two successful attacks in Phase 2. It creates a massive shockwave dealing 3x damage in a 15-stud radius, instantly wiping out most meatshields and backliners with less than 15 range.
Raging Spin of Death quarter his current damage but makes him attack every 0.25 seconds with no windup. His walkspeed also jumps to 8, making him one of the fastest bosses in the game.
How to Beat The Battle Bricks Deathbringer: Step-by-Step Strategy
Beating The Battle Bricks Deathbringer requires a well-planned economy, careful unit placement, and precise timing. Based on player experiences and community reports, here's the most reliable strategy.
Pre-Battle Preparation
First, equip the Investment (Bank) unit. It's highly recommended for this stage because you'll need a strong economy to sustain constant unit spam.
| Recommended Unit | Role | Why It Works |
|---|---|---|
| Investment (Bank) | Economy | Generates cash to spam units |
| Battler | Meatshield | Cheap and spammable |
| Speed Battler | Staller | Fast movement to keep Deathbringer in place |
| Telamon Battler | Tank | High HP to absorb hits |
| Vulcan Battler | Backliner | Consistent damage from range |
| Mafia Grunt | Backliner | Good DPS and range |
Phase 1 Strategy
- Upgrade Investment to level 4 early on.
- Spawn 3–5 Battlers to bait the Kamikaze Battlers and Stunner Battlers that appear.
- When the second Stunner Battler is in range of your Slammer (Cannon), use it immediately.
- Spawn a Speed Battler, then start spamming Battlers until your Investment reaches level 9.
- Once you have enough cash, deploy Telamon Battler to tank, followed by backliners like Vulcan Battler or Mafia Grunt.
Phase 1 is manageable if you maintain constant pressure. The key is to build a strong economy and stack backliners before triggering Phase 2.
Phase 2 Strategy
When Deathbringer uses Blood Sacrifice, all enemies on the field die. This gives you a cash windfall, but his damage output spikes dramatically.
- Stalling is critical. Spam Battlers and Trowel Battlers to keep him occupied.
- Watch for his attack pattern: after two punches, he will use Death Slam. Stop spamming just before the slam to avoid wasting units.
- After the slam, spawn a Speed Battler or Barbaric Battler to keep him in place.
- Repeat this cycle to avoid losing your backliners.
Pro tip: If Deathbringer gets too close to your base, you'll likely lose. Use the Recoil or Absorber cannon to push him back.
Phase 3 Strategy
When Deathbringer reaches 20% HP, he enters Raging Spin of Death. He knocks himself back 10 studs and becomes untargetable briefly. This resets your Vulcan Battler stack's fire rate, but it's a good thing—it gives you a moment to regroup.
- Go wild and spam everything you have.
- Use the Slammer cannon when he gets close.
- Alternatively, use Absorber or Recoil to stall and let your backliners shred his remaining health.
Phase 3 is a DPS race. If you've stacked enough backliners during the earlier phases, you should win easily.
Recommended and Unrecommended Units
Based on community experience, here are the best and worst units to bring against The Battle Bricks Deathbringer.
Recommended Meatshields
| Unit | Reason |
|---|---|
| Battler | Cheap, spammable, great for baiting |
| Trowel Battler | Good HP for the cost |
| Speed Battler | Fast, keeps Deathbringer pinned |
Unrecommended Meatshields
| Unit | Reason |
|---|---|
| Any melee battler without baiting potential | Deathbringer kills them instantly |
Recommended Backliners
| Unit | Reason |
|---|---|
| Vulcan Battler | Consistent damage from safe range |
| Mafia Grunt | Good DPS and range |
Unrecommended Backliners
| Unit | Reason |
|---|---|
| Most healers | Cannot outheal Deathbringer's damage output |
Trivia and Fun Facts
The Battle Bricks Deathbringer has a rich history within the game's community. Here are some interesting tidbits:
- During the April Fools 2023 update, his design was changed to resemble Sans from Undertale, complete with the iconic talking sound effect.
- His old death sound was from the FNaF VHS Series (William Afton burning in hell), but it was changed due to controversy surrounding the original creator.
- He is the first boss that can negatively affect its own allies by sacrificing them for a damage boost.
- He is currently the only final boss in Tumore Mode that does not have armor.
- In Sandbox Mode, using an Archetype Battler on Deathbringer prevents him from dropping below 20% HP.
Frequently Asked Questions
What is The Battle Bricks Deathbringer's weakness?
Deathbringer has no armor and no resistance, making him vulnerable to sustained damage from backliners. However, his high DPS and area attacks make him difficult to stall. The best strategy is to use cheap meatshields and strong ranged units.
How do I survive Deathbringer's Blood Sacrifice?
Blood Sacrifice kills all enemies on the field, but it also gives you cash for each kill. The key is to have a strong economy (Investment) so you can quickly rebuild your army after the sacrifice. Focus on stalling and avoiding his Death Slam.
Can I beat Deathbringer without Investment?
It's possible but much harder. Investment provides the cash flow needed to spam units and maintain pressure. Without it, you'll struggle to rebuild after Blood Sacrifice. Most players recommend using Investment for this fight.
Where does Deathbringer appear?
Deathbringer only appears in Tumore Mode, specifically in the Doomspire Brickbattle stage at the end of Chapter 1. He does not appear in Normal Mode or Challenge Stages.
Conclusion
The Battle Bricks Deathbringer is a formidable foe that demands respect and preparation. By understanding his phases, building a strong economy, and using the right unit composition, you can overcome this challenge and claim the "TO BRING DEATH" badge. Remember to stay patient, time your cannon uses carefully, and never let him get too close to your base. Good luck, and happy battling!
Related Guides
How to Beat Cesus in The Battle Bricks: Boss Guide
Learn how to defeat Cesus in The Battle Bricks with this comprehensive boss guide. Discover strategies, unit recommendations, and tips for victory.
How to Beat The Battle Bricks Infernus: Boss Guide
Master the final boss of Chapter 2 with this guide to The Battle Bricks Infernus. Learn phases, stats, and the best battlers to counter Hellfire.
The Battle Bricks Chronos Guide: How to Beat the Final Boss
Master The Battle Bricks Chronos boss fight with this guide covering Cross, Teabots, clock puzzles, and the best battlers for victory.
The Battle Bricks Doombringer Guide: How to Beat This Boss
Learn how to defeat the Battle Bricks Doombringer with our expert strategy guide. Discover tips, unit counters, and a step-by-step battle plan.